The working of a gas boiler is very simple yet effective. A gas boiler works by extracting air from the internal part of a heated area or else directly from outside. This air is required by the boiler in order to carry out the process of combustion. However, during the working of the boiler, it has been found that if the air is extracted from outside through a plastic pipe that is elongated on the outside wall, then the process of combustion would turn out to be more secure and even more effective.
The System followed by the Boilers
The system of combustion that is followed by the gas boiler is known as sealed combustion because the combustion or the burning of the gas takes place in a chamber that is blocked. This process of combustion does not carry any chances of hazards because the chamber where the combustion takes place is sealed which avoids the gases from seeping out through the blocked areas.
Increasing the Efficiency of the Boilers
The efficiency of the working of a gas boiler can be immensely increased by the use of motorized dampers that help in blocking the outlet of the fuel pipe when the boiler is not in use. This also helps in preventing the heated room air from getting lost between the cycles of the boiler. Electric ignition is another method that can be used in increasing the efficiency of the boiler. But this method requires the use of a standing pilot light in order to carry out the efficiency increase process in a normal manner.
Using Fans with Combustion Systems to increase Efficiency
The combustion systems that have fans attached to them can also be used to enhance the efficiency of a gas boiler. This process does not require any large chimney to be used; instead a small pipe for fuel can also be used directly from the wall.
If a boiler is loaded completely then it can operate at its best, while a decrease in intensity can lead to a drop of twenty percent in the efficiency of the gas boiler.
Prefer Small Boiler instead of the Large Ones
There are a large number of commercial buildings that make use of multiple boilers which they find to suit them according to their needs. Even there are buildings where the requirements are diverse and even in such buildings, multiple gas boilers are brought into use.
However, it is always of great advantage to use a small gas boiler instead of the larger one because the small gas boilers can function very competently and effectively according to the requirements of their users which is not the case with the large systems. It is generally the load of the boiler that has a tremendous effect on the working of the boiler and it has been found in small gas boilers that if they are loaded fully, they can work in a better way and even more effectively that the large ones which are not very efficient when completely loaded. find a plumber near me